Dreambaby Extra Tall Swing Closed Security Gate, Black features
- Gate opens in both directions and swings closed automatically^Easy one-handed operation for adults^Great for pets too^JPMA and ASTM Certified
Dreambaby Extra-Tall Swing closed gate is extremely versatile and will help keep your child safer by preventing access to areas of potential danger. The Extra-tall height is especially good for use with stairs.
The door has an auto close feature and a double locking system for added security. With your Dreambaby gate you can feel peace of mind knowing your child is safer. Great for cordoning off spaces from door widths to much wider spaces with the use of additional extensions. Versatile indeed, it will fit openings of 28″-32″ on its own. Using optional extensions, sold separately, two extensions may be used per side up to a maximum of 111.” This Dreambaby pressure-mounted gate is easily installed and for most situations there is no need to screw holes into woodwork, walls unless used at the top of stairs where the mounting cups must be screwed in for added security. Great for pets too!
- Extra tell 39.4″ height
- Extremely easy to install
- One-handed operation for adults
- Stylishly designed
- Fits an opening of 28″ to 32″ without extensions
- Door opens in both directions
- 16 lbs
Yes, very nice feature!
Q:Does it come with the screws that it needs to be mounted at top of staircase?
Yes, but you better make sure that you buy the extensions. This only measures 32 inches across….much shorter than the average doorway, or you could look for one that is already the correct measurement.
Q:Can the gate be set to remain open instead of automatically closing all the time?
I don’t think so but I put a piece of pool noodle over the latching portion at the bottom of the gate so it doesn’t completely latch when the gate swings shut. It makes it easier to get in and out of the room when your hands are full and still keeps the dog out of the nursery.
Q:will it fit 33″ with tension rods?
our door is 30 inches, and it fits that well, with about an inch of the adjustable bolts out on each side. I think to make it fit 33, you would need the extender they advertise, and to not have to turn the bolts out as far as we do after that was added. Might work okay, but will add to the cost.
Q:what are the dimensions from lowest to highest on gate width?
Do you need height or width ?
Q:Hall is 62.5″ at the bottom and 64″ at top due to baseboards. Will this gate and a 10.5″ and 21.5″ extensions work?
Yes, just make sure the combined width of the gate and extensions don’t exceed the width of the the bottom of the hall.
Q:My door frame is 32″. I will be using the non permanent pressure screw bars for installation. Will this work? Buying an extender will make it too wide
The non permanent pressure screw bars should work, just not as secure as if you screw the holder into the door frame.
Q:Can the extensions be installed at an angle?
no – a peg is inserted to connect the extension to the gate. Must be straight.
Q:With the extensions can this gate fit a 48 inch opening?
we purchased the extension that is offered for this gate. You can put it on either side, whichever works best for you. Opening the gate is a little awkward until you get used to lifting the gate back by the hinge then swing it open.
Q:I can’t seem to find in the product description, HOW TALL IS THIS GATE?
I think it’s 40.5″.
Q:What is the maximum spacing between the bars, please?
Approximately 2 inches in between the bars.